update_random_vibe_props#

Analysis.update_random_vibe_props(project, cca_name, random_vibe_damping=None, natural_freq_min=None, natural_freq_min_units=None, natural_freq_max=None, natural_freq_max_units=None, analysis_temp=None, analysis_temp_units=None, part_validation_enabled=None, force_model_rebuild=None, reuse_modal_analysis=None, perform_nf_freq_range_check=None, require_material_assignment_enabled=None, model_source=None, strain_map_natural_freqs=None)#

Update properties for a random vibe analysis.

Available Since: 2024R1

Parameters:

  • project (str) – str: Name of the Sherlock project.

  • cca_name (str) – str: Name of the CCA.

  • random_vibe_damping (str | None) – str, optional: One or more modal damping ratios. The default is None. Separate multiple float values with commas.

  • natural_freq_min (float | None) – float, optional: Minimum frequency. The default is None. This parameter is for NX Nastran analysis only.

  • natural_freq_min_units (str | None) – str, optional: Minimum frequency units. The default is None. Options are "HZ", "KHZ", "MHZ", and "GHZ". This parameter is for NX Nastran analysis only.

  • natural_freq_max (float | None) – float, optional: Maximum frequency. The default is None. This parameter is for NX Nastran analysis only.

  • natural_freq_max_units (str | None) – str, optional: Maximum frequency units. The default is None. Options are "HZ", "KHZ", "MHZ", and "GHZ". This parameter is for NX Nastran analysis only.

  • analysis_temp (float | None) – float, optional: Temperature. The default is None.

  • analysis_temp_units (str | None) – str, optional: Temperature units. The default is None. Options are "C", "F", and "K".

  • part_validation_enabled (bool | None) – bool, optional: Whether to enable part validation. The default is None.

  • force_model_rebuild (str | None) – str, optional: How to handle rebuilding of the model. The default is None. Options are "FORCE" and "AUTO".

  • reuse_modal_analysis (bool | None) – bool, optional: Whether to reuse the natural frequency for modal analysis. The default is None. This parameter is for NX Nastran analysis only.

  • perform_nf_freq_range_check (bool | None) – bool, optional: Whether to perform a frequency range check. The default is None. This parameter is for NX Nastran analysis only.

  • require_material_assignment_enabled (bool | None) – bool, optional: Whether to require material assignment. The default is None.

  • model_source (ModelSource | None) – ModelSource, optional: Model source. The default is None. This parameter is required for strain map analysis.

  • strain_map_natural_freqs (str | None) – str, optional: Comma-separated list of natural frequencies. The default is None. This parameter is required for strain map analysis.

Return type:

int

Returns:

:
int

Status code of the response. 0 for success.

Examples

>>> from ansys.sherlock.core import launcher
>>> sherlock, install_dir = launcher.launch_and_connect(transport_mode="wnua")
>>> sherlock.project.import_odb_archive(
>>>     "ODB++ Tutorial.tgz",
>>>     True,
>>>     True,
>>>     True,
>>>     True,
>>>     project="Test",
>>>     cca_name="Card",
>>> )
>>> sherlock.analysis.update_random_vibe_props(
>>>     "Test",
>>>     "Card",
>>>     random_vibe_damping="0.01, 0.05",
>>>     analysis_temp=20,
>>>     analysis_temp_units="C",
>>>     model_source=ModelSource.STRAIN_MAP
>>> )